US PVC Pipe Price-Fixing Case Moves to Discovery
A US federal judge let most claims in the PVC pipe price-fixing case proceed on 30 September 2026. $80 million in settlements won final approval on 1 October.
A federal judge in Chicago has sent the PVC pipe price-fixing case to discovery. On 30 September 2026, Judge LaShonda A. Hunt of the US District Court for the Northern District of Illinois issued a memorandum opinion and order in In re PVC Antitrust Litigation, No. 24 C 7639, denying most of the defendants' motions to dismiss. On 1 October she approved two settlements worth a combined $80 million for the end-user class. The case now moves into evidence gathering, and it continues against the pipe producers that did not settle.
No court has yet found that a price-fixing conspiracy existed. Everything decided so far is procedural: the claims can proceed, and two settlements were approved. The case still matters to resin buyers because of one number in the complaints: PVC resin is stated to make up about 70% of the cost of making PVC pipe systems. The alleged coordination channel was a price reporting service. Whatever the final outcome, the docket reads as a checklist for anyone who signs a benchmark-linked offer.
1. What the court actually decided
Three purchaser groups are before the court: direct purchasers, non-converter seller purchasers, and end users. Their complaints allege that 24 PVC pipe converters, organized in at least ten corporate groups, conspired to fix, raise and stabilize prices for PVC pipe systems. The products cover municipal water and sewer pipe, plumbing pipe and electrical conduit. The defendants include Atkore, Cantex, Charlotte Pipe, IPEX, JM Eagle, Otter Tail, Westlake Pipe & Fittings and their associated entities.
The complaints also state that these converters control more than 90% of PVC pipe systems sold in the United States. That market share is a plaintiff figure. It has not been tested at trial.
A motion to dismiss asks the court to end the case before any evidence is taken, on the argument that even if everything in the complaint were true, the law would not provide a remedy. Judge Hunt's order denied those motions "for the most part and granted in part", in the court's own words. Parts of some claims may still be trimmed later. The main path, though, is discovery: document demands, depositions, and internal records going back years.
US antitrust law raises the stakes: a plaintiff who wins at trial can seek treble damages, three times the proven overcharge. Chinese commodity media covered the ruling on 8 October and highlighted this exposure.
2. The alleged mechanism: a price report as a meeting room
The most quoted detail in the complaints is the channel. The purchasers allege that the converters coordinated price increases and exchanged competitively sensitive information partly through Oil Price Information Service (OPIS) and its industry publication, PVC & Pipe Weekly. An OPIS employee is named in the complaints as a participant.
A price reporting service collects voluntary submissions from market participants and publishes averages that contracts reference. Index-linked clauses are common in polymer trade: a monthly average plus or minus a premium, reset each quarter. Working normally, such a service solves a real problem, because two strangers on opposite sides of an ocean need a number both can trust.
The allegations here describe the failure mode. If competitors use the submission and publication process to signal each other, the benchmark stops measuring the market and starts steering it. To be clear: nothing has been proven against OPIS, and the court has not reached that question. The motions were decided on pleading standards. The structural point stands anyway. Whoever compiles a price benchmark holds a position that can end up tested in court, and every index reference in a contract deserves to be read with that in mind.
This case is separate from the trade-remedy actions covered on this site before: the EU, UK and India cases are about duties at the border, this one is about conduct inside a national market.
3. Resin at 70%: why pipe litigation reaches resin buyers
The complaints state that PVC resin is the primary input in pipe making and represents about 70% of total manufacturing cost for PVC pipe systems. That is the plaintiffs' figure, but it matches what every converter knows from the purchase ledger. When resin moves, pipe quotes move with it, with a lag.
For buyers outside the United States, the number cuts both ways. A resin buyer's supplier prices the resin against a benchmark of its own: an index, a producer list price, or a feedstock formula. A buyer of finished pipe for a project can read the US settlement class period, from 1 September 2017 through 10 June 2026, as a measure of how long a pricing question can stay open.
The practical point is that a benchmark is a contract term. It deserves the same scrutiny as a grade specification or a payment clause.
4. The settlements approved on 1 October
| Defendants | Settlement | Scope |
|---|---|---|
| Atkore group: Atkore Inc., Atkore Plastic Pipe Corp., Atkore RMCP, Allied Tube & Conduit, Atkore International | $50 million | end-user class claims only |
| Otter Tail group: Otter Tail Corp., Northern Pipe Products, Vinyltech | $30 million | end-user class claims only |
The court found each settlement fair, reasonable and adequate, and certified a settlement class covering eligible purchasers of PVC pipe products in the United States from 1 September 2017 through 10 June 2026. Counsel have not yet asked for fees or for distribution of the funds. They asked the court to create a litigation fund instead, and the court granted that request.
Two points keep the picture open. First, the settlements resolve the end-user claims against these two groups only, and the case continues against the non-settling defendants. Second, trade press tracking the litigation reports cumulative settlements across purchaser groups approaching $415 million. Neither figure predicts a trial verdict for the remaining defendants, and nothing in the rulings so far addresses the pipe market outside the United States.
5. Confirmed, and only alleged
| Confirmed in court documents | Alleged in complaints, not proven |
|---|---|
| the case exists before Judge Hunt, No. 24 C 7639, N.D. Illinois | a conspiracy to fix, raise and stabilize pipe prices |
| motions to dismiss denied for the most part on 30 September 2026 | use of OPIS and PVC & Pipe Weekly as a coordination channel |
| $80 million in end-user settlements approved on 1 October 2026 | converters control more than 90% of the US market |
| settlement class period 1 September 2017 to 10 June 2026 | resin is 70% of pipe manufacturing cost |
| case continues against non-settling defendants | the named OPIS employee facilitated information exchange |
Keeping these two columns separate is the whole discipline of reading litigation news. The left column moves money and deadlines. The right column will take years to resolve.
6. What to check before a benchmark-linked offer
- The exact benchmark name and publication should be stated in the offer. A vague "market price" clause becomes a dispute paid in instalments.
- The formula should be written out, with a sample calculation. Monthly average, publication lag, currency conversion and rounding are each places where two parties can honestly compute different numbers.
- A successor-benchmark clause should cover the case where the index is discontinued or revised.
- A floor or a ceiling on the movement should be stated. Unbounded formulas amplify a bad month in both directions.
- Quantity, grade and payment terms should be locked separately from the price formula. When everything floats together, neither side can plan production or cash.
- The parties able to see the submission data behind the benchmark should be stated. When the answer is nobody, the risk belongs in the margin.
The first point does most of the work. Most buyers discover the clause references a publication they have never opened. The methodology page should be read once, before the contract is signed.
7. Settled, and not settled
Settled by court documents: the docket number, the judge, the 30 September 2026 ruling, the two settlements and their amounts, the class period, and the continuation of the case against non-settling defendants.
Not settled: whether a conspiracy occurred, what role the reporting service played, what a trial verdict or further settlements will look like, and whether any findings reach export markets at all.
Three public sources:
- In re PVC Antitrust Litigation, memorandum opinion and order of 30 September 2026, full text (vLex) Which grades go into pipe and which into fittings is set out in the grade guide; document questions that follow a ruling are covered in the FAQ.
- Pearson Warshaw LLP, 1 October 2026: court grants final approval of $80 million in settlements
- Poly Pipe News, October 2026: motion to dismiss denied; cumulative settlements approaching $415 million


A buyer pricing suspension PVC against an index and seeking a second opinion on the offer structure can send the grade, the quantity and the destination. The benchmark the offer references is confirmed in writing. A reply usually follows within 12 hours, GMT+8.
Most pipe and fitting plants run on SG-5: PVC Resin SG-5 (K 66-68).
SG-5 for the next production run
The grade, the tonnage and the destination port produce a price, a specification sheet and the full document list, usually within 12 hours (GMT+8).
