GMT+8 · Reply within 12 hours
Haoze logo Shandong Haoze Suspension PVC Resin
Get a Quote
ProductUpdated 2026-09-29SG-3

PVC Resin SG-3 (K 71-72) Data Sheet for Soft Products

SG-3 is the highest molecular weight grade Haoze supplies; it is bought by one kind of customer, the maker of soft or flexible products. Cable compound, film, artificial leather, hose, footwear, foam. Where a formulation carries a large plasticiser load, SG-3 is built to hold it.

A 25 kg bag of suspension PVC resin marked SG-3 to GB/T 5761-2018
SG-3 suspension resin: supplied in 25 kg bags, palletised on request
K value71 – 72
Viscosity number127 – 135 mL/g
Average degree of polymerisation1251 – 1370
Typical useCable, film, artificial leather, hose

Packing|25 kg bags; 800 / 1220 kg jumbo bags; palletised on request|FCL and LCL both work. Palletising and bag printing on request.

Under GB/T 5761-2018, SG-3 is defined by a viscosity number band of 127–135 mL/g, which is the same property expressed as a K value of 71–72 and an average degree of polymerisation of 1251–1370. The figure that decides the purchase is the plasticiser absorption requirement of at least 26 g per 100 g, the highest in the range. The grade goes into cable insulation and sheathing, film, artificial leather, hose, footwear and foam.

Haoze ships SG-3 as a first-tier distributor out of Shandong, China. The resin is not polymerised by Haoze. The batch certificate is issued by the producing plant and is obtained for the buyer on request.

1. What SG-3 actually is

SG-3 is the top of the molecular weight ladder in the grades Haoze holds. Long chains deliver flexibility and toughness, and they cost flow.

The three expressions of the band, all from the same measurement:

  • Viscosity number: the standard defines SG-3 as 127–135 mL/g.
  • K value: 71–72. Buyers outside China usually write K71 or K70.
  • Average degree of polymerisation: 1251–1370.

What actually decides whether SG-3 works on a given line is not the K value alone. The decisive properties are how much plasticiser the powder will take up and how long it takes to fuse. SG-3 has the highest porosity in the range, which is why its plasticiser absorption requirement, at least 26 g per 100 g, is the highest of the four grades supplied. A formulation with 60 phr plasticiser is normal on SG-3 and unworkable on SG-7. The powder simply cannot absorb that much oil and stay dry and free-flowing.

The trade-off is real and worth planning for. High molecular weight means higher melt viscosity and higher fusion torque. Flexible formulations run more stabiliser and lubricant than rigid ones, and the processing window is narrower: SG-3 tolerates less abuse on temperature than a low-K grade does. An overshoot in temperature shows up in colour before it shows up in the physicals.

2. Specification

Source: GB/T 5761-2018, Table 2. The first three rows define the grade and read the same across all three quality grades. Shipments default to the Superior grade unless the purchase order names another.

Property Superior First Qualified
K value71 – 7271 – 7271 – 72
Viscosity number (mL/g)127 – 135127 – 135127 – 135
Average degree of polymerisation1251 – 13701251 – 13701251 – 1370
Impurity particles (per 100 g)≤ 16≤ 30≤ 60
Volatile matter incl. water (%)≤ 0.30≤ 0.40≤ 0.50
Apparent density (g/mL)≥ 0.45≥ 0.42≥ 0.40
Sieve residue, 0.25 mm (%)≤ 1.6≤ 2.0≤ 8.0
Sieve pass, 0.063 mm (%)≥ 97≥ 90≥ 85
Fish eyes (per 400 cm²)≤ 20≤ 30≤ 60
Plasticiser absorption (g per 100 g)≥ 26≥ 25≥ 23
VCM residue (ppm)≤ 5≤ 5≤ 10
Whiteness, 160 °C / 10 min (%)≥ 78≥ 75≥ 70
Packaging25 kg bags800 / 1220 kg jumbo bagsPalletised, on request

Three notes on reading this table.

These figures define the SG-3 band under GB/T 5761-2018. Every conforming batch has to sit inside them. What an individual lot actually measured is on that lot's certificate. The buyer's incoming inspection compares the measured figure against the buyer's own acceptance range, and against these boundary values only as context.

The volatile matter limit is tighter than on SG-5. ≤ 0.30 % against ≤ 0.40 %. On a flexible formulation this matters more than it looks: retained moisture and volatiles show up as bubbles and silver streaking in a thick extruded section, and they are difficult to blame on anything else once the compound is made.

Batch COA comes from the producing plant. A request at enquiry stage obtains the certificate for the lot being offered, sent before the order is placed. Haoze does not issue certificates.

Standards note: GB/T 5761-2018 remains in force. The official record shows it was reviewed on 1 July 2025 with a conclusion of continuing validity. The designation and test-method standards GB/T 3402.1-2026 and GB/T 3402.2-2026 take effect on 1 February 2027 in place of the 2005 and 2010 editions, which changes the test methods written on a certificate. The buyer-side checklist is covered in a separate article.

3. Where SG-3 goes, and how it is processed

Process Typical end products Why SG-3 suits it
Cable extrusionInsulation and sheathing for wire and cableLong chains give the flexibility and ageing performance a plasticised insulation compound needs
CalenderingFlexible film, artificial leather, coated fabricHigh plasticiser uptake lets a heavily plasticised formulation stay dry and processable
Extrusion: profile and tubeSoft hose, garden hose, gaskets, sealsFlexibility in the finished part without resorting to an unworkable plasticiser load
Injection and mouldingFootwear, soles, technical mouldingsToughness and low-temperature flexibility in the finished article
Foam and expansionFoamed sheet and boardMelt strength holds the cell structure during expansion

One point that comes up on almost every switch of source: SG-3 is bought for a behaviour. When a supplier offers a resin whose K value sits at the top of SG-5 and calls it "equivalent to SG-3 for soft products", the plasticiser absorption figure is what settles the argument. That number should be requested and compared.

4. Naming it correctly on a purchase order

What goes on the document What it means Note
SG-3The GB/T 5761-2018 gradeThe designation Haoze quotes and ships under
K 71 – 72 / K71The same band, expressed as K valueConservative buyers write the full band
Viscosity number 127–135 mL/gThe same band, expressed directlyBest form when the contract has an acceptance clause
Soft product grade / 软制品Trade shorthandNot a specification on its own
SG-3 + plasticiser absorption minimum + standard editionA complete order lineThe recommended form for flexible formulations

For a soft-product line, the order line carries one more field than a rigid-product buyer needs: the plasticiser absorption minimum. The formulation depends on that property above all others.

5. Packaging, marking and documents

Item Detail Who provides it
Standard packing25 kg PP woven or kraft paper bags with inner linerHaoze
Bulk packing800 kg jumbo bags, or palletised, on requestHaoze
Private labelThe buyer's own bag design for volume ordersHaoze, on request
Batch certificateCertificate of Analysis for the specific lotThe producing plant, obtained by Haoze on request
Trade documentsCommercial invoice, packing list, bill of ladingHaoze and the carrier
Origin and preference documentsCertificate of Origin, Form E and similarIssued on request, lead time applies
Third-party inspectionArranged at loading, buyer-nominated agency welcomeCoordinates with the buyer's inspector

The inner liner is not cosmetic on this grade. SG-3 with a heavy plasticiser load is more sensitive to what it picks up in transit than a rigid grade, and a torn liner is the first thing to check when a container is opened. How to read the markings on a PVC resin bag covers the fields that belong on the buyer's incoming checklist.

6. What to send for a firm offer

A firm offer for a specific lot is quoted from the following items:

  1. Grade and position in the band: SG-3, plus a viscosity number or K value target.
  2. End product and process: cable, film, leather, hose, footwear; extrusion, calendering or moulding.
  3. Plasticiser load: phr or percentage in the formulation. This is the number that decides whether SG-3 is right.
  4. Quantity: first order and expected monthly volume. FCL and LCL are both workable.
  5. Packaging: 25 kg bags, jumbo bags, palletised, or private label.
  6. Discharge port: the port is specified, with the quote issued FOB Chinese port against it.
  7. Documents required: Certificate of Origin, Form E, third-party inspection at loading.
  8. Payment terms: so the offer states the total cost of the order.

7. Frequently asked

SG-3 versus SG-5 SG-3 is higher in molecular weight (K 71–72 against K 66–68) and has a much higher plasticiser absorption requirement, at least 26 g per 100 g against at least 19. SG-3 is for flexible, plasticiser-rich products; SG-5 is for rigid pipe, profile and sheet. The full comparison across all four grades is here.

Why the volatile matter limit matters so much on this grade Flexible sections are extruded thicker and with a high plasticiser load. Moisture and volatiles that would vent harmlessly from a thin rigid profile show up as bubbles and surface streaking in a soft compound, and once the compound is made it is hard to attribute the fault.

COA review before the order is placed The quantity under consideration is stated, and the certificate for the lot being offered is obtained from the producing plant and sent for review. If the measured plasticiser absorption or viscosity number does not sit inside the buyer's acceptance range, nothing has been spent.

Jumbo bags and private-label printing Both are possible. 800 kg jumbo bags and palletised loading on request; private-label bag printing for volume orders. The artwork, once received, is confirmed against the quantity.

What the price depends on The feedstock route the lot came from, volume and packaging, delivery basis, payment terms, and timing. PVC quotes hold for a shorter window than most plastics. The parameters above produce a dated offer.

Where a specification names an international grade, the K value or the viscosity band identifies the compatible Chinese grade in this range.

Get a firm offer for this grade

The end product, the position in the band, the quantity and the discharge port produce a dated offer together with the COA for the lot being offered.

Related grades

Same suspension process, different K-value bands. Pick by end product, then compare the tables side by side.

WhatsApp