GMT+8 · Reply within 12 hours
Haoze logo Shandong Haoze Suspension PVC Resin
Get a Quote
Documents2026-09-286 min read

China Replaces GB/T 3402.1 and 3402.2 for PVC Resin in 2027

Two standards for vinyl chloride resins take effect 1 February 2027, replacing the 2005 and 2010 editions. What is confirmed, what is in draft, what to check.

阅读中文版 →

Читать на русском →

Two Chinese national standards that decide how vinyl chloride resins are named, and how their properties are measured, have been replaced. They were issued on 2 July 2026 and take effect on 1 February 2027.

Where a purchase contract names only "SG-5", where an incoming inspection sheet cites a standard edition, or where a supplier's certificate carries a number never looked up, this is the date to write down.

Everything below comes from the official standard records. Where something is only a work programme, or only a claim made on a sales page, it is labelled that way.

GB/T 3402.1-2026 and GB/T 3402.2-2026 were published on 2 July 2026 and replace the 2005 and 2010 editions on 1 February 2027. The product standard most buyers actually quote, GB/T 5761-2018, is not being replaced. The official record shows it was last reviewed on 1 July 2025 and continued in force. For a buyer the task is narrow but specific: each supplier should confirm in writing which standard edition the certificate follows, and the contract should name a standard as well as a grade.

1. What was actually published

The instrument is National Standard Announcement No. 30 of 2026, dated 2 July 2026, approving 508 recommended national standards and one amendment. Three of them touch PVC resin directly.

Standard Official title Replaces Published In force
GB/T 3402.1-2026Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 1: Designation system and basis for specificationsGB/T 3402.1-20052026-07-022027-02-01
GB/T 3402.2-2026Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Preparation of test samples and determination of propertiesGB/T 3402.2-20102026-07-022027-02-01
GB/T 2547-2026Plastics — Sampling methodsGB/T 2547-20082026-07-022027-02-01

Both parts of GB/T 3402 are modified adoptions: Part 1 of ISO 24024-1:2021, Part 2 of ISO 24024-2:2021. That single fact explains why the revision happened. The 2005 and 2010 editions were written before that ISO series existed. The official records are open:

2. What these two standards actually do

Neither is a product specification. They are the framework underneath the specifications.

Part 1 is the naming side. It establishes a designation system for vinyl chloride thermoplastic resins, which properties distinguish one type of resin from another, and the ranges those properties occupy. The published scope lists five of them.

Axis Designation property Applies to
1Viscosity numberAll resins
2Apparent densityAll resins
3Residue on a 63 µm sieveAll resins
4Plasticizer absorption at room temperatureGeneral-purpose and filled resins
5Viscosity and rheological type of the standard pastePaste resins only

The scope is equally explicit about what it does not do: it supplies no engineering, performance or processing-condition data for a specific end use. That is the most common misunderstanding about a naming standard. It will not name the grade to buy. Grade selection stays a formulation question, answered on the buyer's own line.

Part 2 is the method side. It covers sample preparation, conditioning, and which properties are to be determined with which test method. Only the catalogue entry is public, because the document adopts an ISO text and is not offered for free online reading. Its reference list points at the existing GB/T test-method standards for viscosity number, sieve residue, foreign-particle count and fish-eye count. So the properties being measured are not new. What is re-pinned is the framework saying which of them characterise a type of resin, and how the sample behind them must be prepared.

Stacked 25 kg PVC resin bags printed with grade SG-3 and net weight
Read the sack for grade and net weight. Which edition of which standard the resin was tested to is not printed on the bag. It lives on the certificate and in the contract, and that is exactly where this transition will show up.

3. What did not change

GB/T 5761-2018, the product standard for suspension general-purpose PVC resin, is still current. The official record shows it was last reviewed on 1 July 2025 with the conclusion "continued in force". The SG grade ladder, with its K-value bands, is unchanged for now, and a technical agreement written around GB/T 5761-2018 does not expire on 1 February 2027.

Pages from commercial testing services still appear stating that a revised GB/T 5761, sometimes written as a 2025 or 2026 edition, has already taken effect. Such an edition does not appear in the official database. One rule covers it: a standard number absent from the official database is a question for the supplier, not a reason to reject a shipment.

And labelled clearly as work programmes, not as published standards: the same technical sub-committee has drafting work listed on apparent density, plasticizer absorption at room temperature, the fish-eye test method, and a standard for chlorinated polyvinyl chloride resin. None is in force, and none should be cited on a certificate as though it were.

4. Why a designation standard carries commercial weight

Trade shorthand for PVC resin comes from three places, and they get mixed up constantly.

  • Product-standard grades: SG-5, SG-3 and so on, defined by GB/T 5761.
  • Producer model numbers: S-700, S-1000, S-1300, defined by a producer's own enterprise standard.
  • Standalone properties: K-value, viscosity number, apparent density, quoted with no standard behind them at all.

A designation standard is what makes the three comparable. It fixes the axes (viscosity number, apparent density, sieve residue, plasticizer absorption, paste type) along which two pieces of paper from two companies can be lined up. When the basis is revised, the resin does not change; the vocabulary does. The risk is that the vocabulary stops matching across a deal.

5. The transition checklist

Fourteen months is enough time to do this properly, and short enough that leaving it to January 2027 is a mistake.

When Action Keep for the file
NowAsk each supplier in writing which standard edition the certificate is issued against, and under which edition the material was actually testedThe written reply, per supplier
NowAsk whether technical data sheets will be re-issued against the new edition, and from what dateThe answer, with a date on it
NowCheck whether the incoming inspection sheet names a standard edition, or just says "per COA"A copy of the current sheet
Before 2027-02-01Update the specification and contract template so they name a standard edition as well as a gradeThe revised template version
Before 2027-02-01Confirm which party on the buyer side holds the text of the new standard: the lab, the inspector, or neitherDocument owner's name
First shipment after 2027-02-01Compare the new certificate against the previous batch: same axes, same units, same method referencesBoth certificates, side by side
OngoingDo not change supplier and standard edition in the same shipmentA dated record of the qualified basis

6. Where to check what, document by document

Document What it usually says What to check through the transition
Purchase contractGrade, quantity, Incoterm, paymentThat a standard edition is named, as well as the grade
Technical data sheetK-value, apparent density, residue, absorptionThat units and method references match the edition in force
Certificate of analysisBatch values plus a standard lineThat the edition cited is one found in the official database
Third-party inspection reportSampling plan and test methodsThat sampling follows the current sampling standard, not a superseded one
Incoming inspection recordThe buyer's own methods and conditioningThat method numbers and conditioning match the edition in force on the shipment date

One question covers most of the exposure, and it is worth putting in writing before the contract is signed: state the certificate's standard edition, and whether the batch data can be supplied in that edition's units. A supplier that answers clearly signals which edition it is working to.

Because both new parts adopt ISO texts under copyright, neither is free to read online, but the catalogue records linked in section 1 give the scope, the dates and the drafting committee, which is enough to verify any claim anyone makes about them, including this article's. An order documented against the right edition, with grade, standard edition, units and method stated the same way on the contract, the data sheet and the certificate, can be requested by sending the grade, the quantity and the destination; the quote returns in that form. Reply usually within 12 hours, GMT+8.

Next: How to read a PVC resin bag. It covers what the standard line, the grade line and the net weight on a 25 kg sack actually show.

Grade reference: PVC Resin SG-5 (K 66-68) shows the band the 2027 editions apply to, and the items a certificate should carry.

SG-5 for the next production run

The grade, the tonnage and the destination port produce a price, a specification sheet and the full document list, usually within 12 hours (GMT+8).

WhatsApp